ballet + top dress DEPLY Sew Along Day 3/ Halfmoon Atelier

ballet + top dress DEPLY Sew Along Day 3/ Halfmoon Atelier




This sew along was written for Halfmoon Atelier you can find the Ballet Top+ Dress Deply pattern HERE to join in the sew along and also follow over at Halfmoon Atelier Blog.

DAY 3  FACINGS, ATTACHING FACINGS TO THE BODICE/ DRESS

Today we will be constructing our facings of the Ballet Top + Dress DEPLY  and attaching them to the bodice/dress! The steps for the top and the dress are the same. Again we are working on Version A

Let’s get started!


Step 12. Using French Seams, sew the front and back facings together, at the sides, under the arms ( also both sides for the DRESS). Press the seams to the front.

Please refer back to steps 7 and 8 in Day 2 for construction method of French Seams

STEP 12

STEP 12

Step 13. Finish the bottom of the facing, being sure not to cut off or cross the gather stitch or loose thread tails. Fold the bottom edge up, toward the wrong side, by 0.5cm (¼”) and press. Then fold up again by 1cm (⅜”). Press, pin and edge-stitch.


STEP 13

STEP 13

Step 14. With the bodice/dress right side out and the facings wrong side out, place the facing wrong side out, place the facing around the bodice ( so that right sides are together), matching up the straps, darts and markings. Pin around the neck, back and under the arms.

STEP 14

STEP 14

IMPORTANT: Tie a knot at the top of the gather stitch on both the facing and the bodice, and do not sew across the gather stitch.

Step 15. Sew around the neck, back and underarms with a straight stitch, leaving the last 5cm (2”) of each strap open.. Trim the seam allowances around the neck, back and underarms to about 0.5 cm (¼”).

STEP 15   To avoid ripples, clip into the seam allowance ( including through the stay stitch,if this was not trimmed off) at the curved bits, being sure not to clip the seam.

STEP 15 To avoid ripples, clip into the seam allowance ( including through the stay stitch,if this was not trimmed off) at the curved bits, being sure not to clip the seam.

Step 16. Turn your garment right side out and press the seam allowance and facing away from the bodice/dress. Under stitch around the neck, back and underarms on the right side of the facing, as far as possible, between the straps.

STEP 16   Note: You will not be able to understitch along the entire seam. Don’t worry about this!

STEP 16 Note: You will not be able to understitch along the entire seam. Don’t worry about this!

That is all for today! We are so close to completing our garment. Next we will have steps to finish the shoulders using an all in one facing technique,and finishing gathers on the front of the bodice/ dress.

ballet top + dress DEPLY Sew Along Day 4/ Halfmoon Atelier

ballet top + dress DEPLY Sew Along Day 4/ Halfmoon Atelier

ballet top + dress DEPLY Sew Along Day 2/ Halfmoon Atelier

ballet top + dress DEPLY Sew Along Day 2/ Halfmoon Atelier